# No Sound on an iMac 2019 Running Omarchy (and How I Fixed It)

Author: Ziyan Junaideen
Published: 2026-10-06T04:31:00Z
Updated: 2026-10-08T08:43:26Z
Original: https://www.jdeen.com/blog/no-sound-on-an-imac-2019-running-omarchy-and-how-i-fixed-it

![Omarchy iMac 2019 Audio issues - internal speaker not working and plugging an earphone doesn't work.](https://sgp1.digitaloceanspaces.com/jdeen/uploads/573dfdbf-2896-4ddd-bff4-4082a8c63b78/2026-10-06-fixing-audio-imac-2019-omarchy.jpg)

A few days into a fresh [Omarchy](https://omarchy.org) install on my old Intel iMac, I plugged a pair of wired earphones into the headphone jack. Nothing. I tried the built-in speakers. Also nothing. PipeWire listed an output device, the volume was up, nothing was muted, and the machine still made no sound.

Here's what was going on, how I tracked it down from the terminal, and the fix.

### The machine

<table>
<thead><tr><th></th><th></th></tr></thead><tbody><tr><td><strong>Model</strong></td><td>iMac19,1 (iMac Retina 5K, 27-inch, 2019)</td></tr><tr><td><strong>CPU</strong></td><td>Intel Core i9-9900K @ 3.60GHz</td></tr><tr><td><strong>RAM</strong></td><td>40 GB</td></tr><tr><td><strong>GPU</strong></td><td>AMD Radeon Pro 570X/575X/580X family (Ellesmere / Polaris; <code>lspci</code> can&#39;t tell which)</td></tr><tr><td><strong>Audio controller</strong></td><td>Intel 300 Series Chipset HD Audio (<code>00:1f.3</code>)</td></tr><tr><td><strong>Audio codec</strong></td><td>Cirrus Logic CS8409, Apple subsystem ID <code>0x106b1000</code></td></tr><tr><td><strong>Firmware</strong></td><td>Apple EFI 2094.80.5.0.0</td></tr><tr><td><strong>OS</strong></td><td>Omarchy 4.0.4 (Arch-based, Hyprland)</td></tr><tr><td><strong>Kernel</strong></td><td><code>7.2.5-3-omarchy</code></td></tr><tr><td><strong>Sound server</strong></td><td>PipeWire 1.6.8 + WirePlumber 1.6.8</td></tr></tbody>
</table>

#### How to find these details yourself

You don't need macOS or "About This Mac" for any of this. Everything above came from the terminal.

**Apple model identifier (the `iMac19,1` part).** The kernel exposes the SMBIOS/DMI data under `/sys`, readable without root:

```bash
cat /sys/class/dmi/id/product_name    # iMac19,1
cat /sys/class/dmi/id/sys_vendor      # Apple Inc.
cat /sys/class/dmi/id/board_name      # Mac-AA95B1DDAB278B95 (Apple board ID)
cat /sys/class/dmi/id/bios_version    # 2094.80.5.0.0
```

Or with `dmidecode` (needs root):

```bash
sudo dmidecode -s system-product-name
```

Search the model identifier together with "everymac" to get the marketing name. `iMac19,1` is the *iMac (Retina 5K, 27-inch, 2019)*.

**CPU, memory, GPU:**

```bash
grep -m1 "model name" /proc/cpuinfo
free -h
lspci | grep -iE "vga|audio"
```

**Sound card and codec.** This is the part that matters for audio problems:

```bash
cat /proc/asound/cards          # which sound cards the kernel registered
aplay -l                        # playback devices; shows "CS8409 Analog"
head -5 /proc/asound/card0/codec#0
```

That last command printed:

```
Codec: Cirrus Logic CS8409
Vendor Id: 0x10138409
Subsystem Id: 0x106b1000
```

`0x1013` is Cirrus Logic's vendor ID. The subsystem ID starting with `0x106b` is Apple's. That combination is the clue to the whole problem.

**OS, kernel, audio stack:**

```bash
omarchy-version
uname -r
wpctl status
```

### The symptoms

`wpctl status` looked completely normal: one "Built-in Audio Analog Stereo" sink, set as default, at 40% volume. Nothing was muted. Looking closer at the sink:

```bash
pactl list sinks | sed -n '/Ports:/,/Formats/p'
```

```
Ports:
    analog-output-speaker: Speakers (... availability unknown)
    analog-output-headphones: Headphones (... availability unknown)
Active Port: analog-output-speaker
```

Two things stood out:

1. With earphones plugged in, the active port was still **Speakers**.
2. Both ports said **availability unknown**.

The ALSA mixer explained why:

```bash
amixer -c0 contents | grep -A2 Jack
```

```
name='Headphone Phantom Jack'   values=on
name='Mic Phantom Jack'         values=on
name='Speaker Front Phantom Jack' values=on
```

All the jacks were **Phantom**. A phantom jack is ALSA's placeholder for a connector with no working plug-detection. It always reports "on", so PipeWire and WirePlumber can't tell whether anything is plugged in and never switch outputs.

I switched to the headphone port by hand:

```bash
pactl set-sink-port alsa_output.pci-0000_00_1f.3.analog-stereo analog-output-headphones
speaker-test -c2 -t sine -l1
```

Still silent. The speakers were silent too. At that point it was clearly not a configuration problem. The driver itself wasn't working on this hardware.

### Root cause: the CS8409 driver doesn't really support Apple machines

The kernel log showed the CS8409 driver loading and doing its generic setup:

```bash
journalctl -k -b | grep -i cs8409
```

```
snd_hda_codec_cs8409 hdaudioC0D0: autoconfig for CS8409: line_outs=2 (0x24/0x25/...) type:speaker
snd_hda_codec_cs8409 hdaudioC0D0:    hp_outs=1 (0x2c/...)
```

The driver found the speaker pins and the headphone pin. The problem is what sits *behind* those pins.

The CS8409 is a bridge chip: it handles the HD-Audio link and passes audio on to separate companion chips over I2C. On Apple machines the headphone jack runs through a separate Cirrus **CS42L83** headphone codec, and the speakers run through their own amplifiers. Those chips have to be configured over I2C before they make any sound.

The mainline Linux `snd-hda-codec-cs8409` driver was written for **Dell** laptops that use the CS8409. It includes setup code for Dell's companion-chip wiring, not Apple's. On an Apple subsystem ID it falls back to generic configuration. Audio is sent to the right pins, but the companion chips are never switched on, so nothing comes out. That's also why jack detection was missing: on these Macs the plug-detect signal comes from the CS42L83, which the driver never talks to.

### The fix: davidjo/snd\_hda\_macbookpro

David Jo (davidjo on GitHub) maintains [**snd\_hda\_macbookpro**](https://github.com/davidjo/snd_hda_macbookpro), a patched CS8409 driver with the Apple-specific setup added. Despite the name, it covers Intel iMacs as well as MacBook Pros that use this chip.

The installer downloads the matching mainline kernel source, patches the Cirrus driver, and builds it through **DKMS**. That means it gets rebuilt automatically every time the kernel updates, which matters on a rolling-release distro like Arch/Omarchy.

#### Prerequisites

You need the headers for your exact running kernel, plus `dkms`, `gcc`, `make`, `patch` and `wget`. Omarchy already had the headers (`linux-omarchy-headers`) and `dkms` installed. The only thing missing was `wget`, which the installer uses to download the kernel source:

```bash
pacman -Q linux-omarchy-headers dkms   # confirm headers match `uname -r`
sudo pacman -S --needed wget
```

> If you're on stock Arch, install `linux-headers` (or the headers matching whatever kernel you run) instead.

#### Install

Clone it somewhere permanent. DKMS creates a symlink to this folder at `/usr/src/snd_hda_macbookpro-0.1`, so don't clone into a temp directory or delete it later.

```bash
mkdir -p ~/.local/src && cd ~/.local/src
git clone https://github.com/davidjo/snd_hda_macbookpro.git
cd snd_hda_macbookpro
sudo ./install.cirrus.driver.sh -i
```

The important lines of output:

```
Building module(s).... done.
Found pre-existing .../kernel/sound/hda/codecs/cirrus/snd-hda-codec-cs8409.ko.zst, archiving for uninstallation
Installing /usr/lib/modules/7.2.5-3-omarchy/updates/dkms/snd-hda-codec-cs8409.ko.zst
Running depmod... done.
```

DKMS saves the original module, and the patched one goes into `updates/dkms`, which takes priority over the stock module.

Then **reboot**. Swapping HDA codec drivers on a running system is unreliable.

### After the reboot

Audio works. To confirm the new driver is the one loaded:

```bash
modinfo snd-hda-codec-cs8409 | grep filename
# /lib/modules/7.2.5-3-omarchy/updates/dkms/snd-hda-codec-cs8409.ko.zst

dkms status | grep macbook
# snd_hda_macbookpro/0.1, 7.2.5-3-omarchy, x86_64: installed (Original modules exist)
```

Jack detection works too. The headphone jack is no longer "Phantom":

```
name='Headphone Jack'   values=on     <- earphones plugged in
name='Mic Jack'         values=off
```

PipeWire now knows what's connected and switches outputs automatically:

```
analog-output-speaker:    Speakers   (... not available)
analog-output-headphones: Headphones (... available)
Active Port: analog-output-headphones
```

### Undoing it

If a future kernel ships proper Apple CS8409 support, or the module misbehaves, removing it brings back the stock driver:

```bash
cd ~/.local/src/snd_hda_macbookpro
sudo ./install.cirrus.driver.sh -r
# reboot
```

### TL;DR

- **Symptom:** no sound from the speakers or the headphone jack on an Intel iMac/MacBook running Linux. ALSA shows only "Phantom" jacks.
- **Check:**`head -5 /proc/asound/card0/codec#0`. If it says `Cirrus Logic CS8409` with a subsystem ID starting `0x106b`, you have this problem.
- **Cause:** the mainline CS8409 driver only sets up the Dell variants. Apple's speaker amps and CS42L83 headphone codec are never switched on.
- **Fix:** install [davidjo/snd\_hda\_macbookpro](https://github.com/davidjo/snd_hda_macbookpro) through DKMS, then reboot.

*Tested with driver commit `89b22ff` (2026-09-06) on kernel `7.2.5-3-omarchy`.*
